After about a month’s preparation, we successfully conducted an Arduino Hackathon this past Friday. It was great to get more folks at work excited about all the things that can be done using this technology. I’m really looking forward to seeing what folks do with it, now that they understand it and have seen how easy it is to use. I’ll add some links to the Mutual Mobile website once pictures get posted there.
I’ve been busy playing with Arduinos these past few months. I think I must have been locked in a cave the past 8 years or so. I’ve been shocked by how advanced and inexpensive these things have become. These things are awesome, and very inexpensive. I plan on installing a dozen or so throughout my RV to control just about everything. Couple that with my iPhone programming skills, HomeKit, Siri, and the new Amazon Echo, and this is going to be a high tech playground for me. Woohoo!
I had been struggling with getting nRF24+ radios working, to provide cheap communication between Arduinos. It turns out that a bunch of folks at MySensors have already implemented a very cool, open source solution along the same lines. This is an incredible site. The information there really helped me get my radios working. They’ve done a lot of good work to provide clear instructions on how to connect multiple Arduinos together using open source software. These Arduinos can then read various types of sensors in order to control all sorts of things. I feel like a kid in a candy store (“ooh, which one do I want next?”). The crazy part is the price of these parts. They have a really well done page listing out links to buy all the various parts at unbelievable prices. Thank you MySensors!
Unfortunately, I think I’ve let myself become spread too thin across exploring and playing with all these cool technologies. I’ve written an iPhone app and Apple Watch extension that uses the Lightblue Bean to display the level of the RV remotely. I got it working well enough to use for myself, but I haven’t taken the final steps to post it to the App Store so that others can use it also. It’s very close to being in a state that can be released to the app store, but I’d rather play with new Arduino projects instead of spending the time to finish and submit it. I’ve also setup several Arduinos to control fans and lights in the RV, but they’re still sitting on the workbench. I’m trying to get them connected to the internet so the Echo and iPhone can control them.
So now I’m going to try to be disciplined with myself, and focus on getting a few basic pieces done and installed before worrying about adding more advanced features. With the 3 day weekend coming up, I’m hoping to get the Lightblue Bean installed in my closet to control a string of led lights based on sliding door microswitches, and an Arduino Uno hooked up to control dimming some LED recessed spotlights that I installe over my booth workbench. I’ll post back later about how that goes.
Another piece of my RV Automation project arrived today: the Amazon Echo. I’ve gone back and forth about whether to include an Echo in my project. My mind was made up last month though, when I received notification that Amazon was releasing an API to Alexa’s voice interface to developers. So I signed up for the developer program, and upon confirmation, I ordered an Echo.
Upon opening the box, I found the Echo, power cord, and remote control. Taking these out of the box, I found a single 2″ x 8″ instruction card that told me to plug it in, and then download the free Echo app. So I plugged-in the Echo, and a blue ring appeared at the top, with a cyan spot rotating around it. About 30 seconds later, the ring turned orange, and I was greeted with a very pleasant “Hello. Your Amazon Echo is ready for setup. Just follow the instructions in your Echo pack.”
So far this is looking pretty good. Packaging is top notch, visual appearance is very modern and attractive, and the sound of Alexa’s voice is very pleasing.
So next I downloaded and installed the Echo app. I was a bit surprised to see that the Echo app only had a rating of 2.5 out of 5 stars. But proceeding on, the app downloaded quickly, then prompted me for my Amazon.com login upon starting. I was then instructed to wait for the orange light ring, and pressed Continue.
I was then instructed to switch my iPhone’s Wi-Fi to connect to the Echo’s Wi-Fi hub (“Amazon-XXX”). Once I did that, Alexa told me it was setup, and to continue in the Echo app.
The app then prompted me for my network name and password. It then confirmed that I’d entered the password correctly, and completed the setup, ending with an introduction video.
The Echo app then walked me through saying a few things to Echo, like “Alexa, what’s the weather” and “Alexa, play It’s a Long Way There by Little River Band.”
I then explored the Echo app, providing information in the Settings pages, and running through Voice Training. This took about 30 minutes total.
Overall, setup was quite painless, and Echo seems to work great. Now my mind is racing on to all the things I’d like to do with it:
- Control the lights in my RV
Since my RV runs on 12v, I’m hooking up Arduino’s to control them. But there aren’t off-the-shelf solutions, like there are for normal 120v house lighting. So I’m expecting to need to use the Alexa API to route commands to a web server running on one of the Arduinos with an Ethernet Shield.
- Control my Home Theatre and Stereo system
Again, I may need to use the Alexa API to route commands to an Arduino with an IR interface. Someday I may be able to upgrade my TV and stereo to be directly controllable via WiFi or BTLE, but for now I should be able to simulate a universal remote.
- Voice control my MIDI keyboard setup
I’d like to be able to start/stop recording while I’m playing piano.
- Query status of various inputs (temperature, humidity, level) related to my RV
Even better yet would be to get notified when something is amiss, such as a leaky RV roof seam.
I could probably dream all night about this sort of stuff, but I think I need to pick something and try my hand at using the Alexa API. I’ll report back later my experiences doing so.
I’ve started playing with the LightBlue Bean as a part of my RV Automation project. This $30 part combines a low power, 3.3v Arduino board with Bluetooth LE, several sensors, and an attached 3.3v watch battery. This means that it can be used to do a lot of jobs without any connections whatsoever, and it can talk with an iPhone over BTLE.
I first heard about this part from a github article that my friend Sean wrote. It’s a well written article, fun to read, and I recommend that you read it. Thank you, Sean.
What Can I Do With A LightBlue Bean?
I think the best thing about this part is the built-in blue tooth.
I expect the bean to be a bridge from my iPhone to other Arduinos. BTLE makes it very simple to interface to an iOS device using
I may be able to take advantage of the fact that any BTLE device can be configured to act as an iBeacon. This will enable the iPhone app to determine proximity to it. This leads to all sort of automation possibilities:
- Turning nearby lights on/off
- Disabling security system when near
- Unlocking doors
Of course, security will be important, so I’ll have to consider carefully the use of a passcode or some other system to prevent allowing unwanted access if my phone is stolen.
Using the built-in 3 axis accelerometer
The bean also includes a built-in 3 axis accelerometer. This means that it can detect motion in any direction.
One of the shortcomings of living in an RV is that it moves when walking around inside of it. I’m planning on turning this into an advantage, and use this as a component of my security system.
The accelerometer will be used to help me level the RV when parking. Since gravity is indistinguishable from acceleration, it makes a great way to check for level. I’ll need a way to calibrate the level settings after mounting the bean, and I’ll want to convert the accelerator readings from Gs to angle for display on my iPhone.
Another possible application, but one I don’t plan on using at this time, would be to mount the bean to a door. Since it’s battery operated, this could be as simple as just sticking it onto a door.
Using the Temperature Sensor
This is a no-brainer, but does require me to think about where I mount it. Do I want interior or exterior temperature readings?
Using the RBG LED
I expect to mount the LED such that it can be used for displaying status of some sort. It can display any color, and be dimmed and/or blinked, allowing for a large range of indications.
Interfacing with Other Arduinos
I expect the bean to be a bridge from my iPhone to other Arduinos using inexpensive RF24 parts. These can be purchased for under $2 each.
Replacing the Battery
I expect to connect it to my RVs 12v system eventually, so I don’t have to keep replacing batteries. This will require a 3.3v regulator. The LD1117v33 is available from Amazon for under $2.
After removing the wall, we relocated the booth table and bench seats down into the garage. This required unscrewing the booth from its current location:
and mounting it into the new location in the garage:
Here it is almost finished. There is still some trim work to do, though.
With the booth removed from its old location, we then bought a couple inexpensive chairs. We really like the way this change opened up the area.
We had expected to garage wall to come down pretty easy, and for the most part that was correct. My neighbor John recommended that I contact the manufacturer to ask about it. I did so, and was surprised to receive a reply within a day stating that it should be ok. There are no wires, pipes, or structural issues with doing so.
My plan was to remove the door, and then start on the garage side taking the paneling down to see how the wall was constructed. This helped me see where the screws were located.
Upon close inspection, I discovered a problem. The side of the walls are attached to the walls with screws. I could see the screws protruding in from the outside wall, but the screw heads are not visible on the outside walls. So I concluded that the walls were screwed in place before the outside paneling was installed. This made it impossible to remove the screws without removing the outside paneling, which I did not want to do. So I ended up drilling holes around each protruding screw, and then ripping the wood off the wall. This left each screw protruding from the wall. I then used a power grinder to cut each screw off at the wall. I’ll need to apply some sort of trim to hide the cut-off screws.
The picture above shows the garage looking from inside the RV. Part of the old wall is leading against the back (tailgate). The grinder used to remove the screws is laying next to where the wall used to be, and next to the step that leads down to the old garage.
Above the garage is a bed loft. The wall provided a bit of support to the bed, so we’ll need to reinforce it with a post or additional angle iron. We didn’t need to make that decision right away, but eventually decided to make a post that would only be put into place when using the loft. This leaves the space wide open the rest of the time.
Our first step, upon deciding to remove the garage wall, was to go purchase a couch. It didn’t take us long:
We’ll be picking it up next weekend, once the garage wall has been removed so we can get it in. This unit has a fold down center console, and dual recliners. It will be replacing both the recliner and the sofa. The console doesn’t have power ports, so we’ll be adding those later.
My wife and I have been in our current RV for about 2 years now. It is a 2007 KZ New Vision Sportster 41′ toy hauler (41KGx2).We bought it used, so it already had a bit of wear on it. We decided a couple weeks ago to do some major fixing up.
Note: not shown in the above floor plan is the 2nd door in the garage (storage area), nor the bed loft above it. I’ll be posting some pictures later on.
One of the problems with fixing up an RV is that the doors on an RV are only 24″ wide. We’ve about worn out the current recliner and sofa. But buying a new one was a challenge because of the narrow door width. We had about resigned ourselves to ordering one from an RV company, but then a plan started coming together (don’t you just love that?).
We originally purchased a toy hauler because we liked the idea of being able to take our motorcycle with us. But what really sold us was the idea of using the extra space to expand our living area. So for the past couple years our “garage” has actually been my piano room. We also put a 2nd refrigerator in there, and use it for ironing. It was really nice having the tailgate, because we could easily move big things into it, like the refrigerator.
We had originally thought that the separate garage would provide a mini-apartment for our kids when they visit. This hasn’t happened, though. The kids usually sleep in the fold out couch or loft in the main area. So it occurred to us, why not take down the garage wall, opening up the main area space?
I realize that the main reason for the garage wall is to keep the gasoline smell out of the living area. But we don’t keep the motorcycle in the garage. When we go somewhere, the first thing we do when we get there is to take it out.
Once we started thinking about taking the wall down, we realized that without the wall, we could bring any size furniture into the living room through the tail gate.
And so the project begins. I’ll be posting our progress as we go.
I’ve been playing with Apple’s new HomeKit framework. It attempts to provide a way to integrated all your automated home devices, allowing a single app to control them all. Even better, Siri can be used.
This is still early, so we’ll have to see how it plays out. But you can bet I’m going to be looking at how to use this technology in my RV. I’ll be blogging about it going forward.